In summary, partial and incomplete blood filling of glucose meter strips is often associated with inaccurate reading. It turned out that the glucose concentration in the sample had no correct fill test strip on the study results. The role of self-monitoring of blood glucose in the care of people with diabetes:
Comparisons between the different devices were performed by means of contingency tables. First, this was a laboratory investigation, therefore the devices and strips were not operated exactly in accordance with the instructions for use for blood taken directly from the fingertip of a patient. It can be seen that almost all devices responded correctly during all 24 measurements to the very low volume of 0. In a previous pilot study, we college movie porn confirmed that our internal capillary reference correct fill test strip StatStrip, NovaBiomedical requires exactly 1. Processing of blood samples was performed as described earlier.
The largest number of wrong readings, however, occurred with the 1. According to our knowledge, no thorough investigation of this condition has been published yet in the international literature, so we developed an in-house testing protocol in our laboratory. Phasor transform to extract glucose and ascorbic acid data in an amperometric sensor. According to our knowledge, the impact of insufficient strip filling on device performance has never been evaluated in a comparative study, and no information about a thoroughly performed study on this topic can be found in the international correct fill test strip.